Evaluation: Klear Kustoms can bring any vehicle back to its former glory; but in some cases this might not be practical, or it may involve one or two donor vehicles purchased only for parts. So before any restoration work starts; candidates get a thorough evaluation of mechanical and physical condition. What we call a (Vehicle Inspection Package). Disassembly: After receiving the green light from the client, to begin the restoration, we divide the vehicle in four sections: Front End, Interior Section, rear End and Undercarriage. What this mean is that all the parts will be carefully disassembled tagged, bagged and or labeled and stored in boxes belonging in its respective sections for future ease of identification. As we disassemble a vehicle pictures are taken through out the process to be used as reference to create a more efficient restoration. We believe in being proactive this will make for an efficient and fast worry free restoration. Diagnosis: After Disassembly is completed we then decide on the best process to remove rust by way of acid dipping, soda blasting or a combination of the two this way we ensure we are removing paint, body filler and that pesky thing called rust. Next the body is attached to the rotisserie or a frame jig to examine the extent of decay due to corrosion the areas that require special attention can be mapped out and a repair plan can be established. We will then spray a Sherwin-WilliamsCORROSION SHIELD ® Vinyl Wash Primer a two component, primer with corrosion resistance and excellent adhesion for direct-to-metal applications. This primer is intended for use as a metal treatment under Sherwin-Williams primer surfacers. This product can be applied over cleaned aluminum, galvanized steel, and stainless steel, or over appropriately sanded or blasted carbon steel, sanded fiberglass and sanded OEM e-coat primers. As explained on the Sherwin-Williams paint manuals. With the vehicle attached to the rotisserie suspended at comfortable working height, it allows us to be able to rotate the vehicle spray the primer and reach into areas that under normal conditions we would not be able to get to; or would be but with a greater level of difficulty. The reason we spray the body with epoxy primer is to add corrosion protection and adhesion to other products. Rust Repair: After the Epoxy has fully cured we proceed to start working on the metal so going back to our earlier established plan, we will either replace if not available we will fabricate replacement panels. These panels will be cut and welded at the factory seams and sprayed with weld through primer. This process is much easily accomplished with the vehicle still mounted on the rotisserie with all the mechanicals removed. We have equipped ourselves with certain tools that enable us to reproduce nearly any panel we need to replace such as an English Wheel, Shot Bag, Bead Roller, Metal Brake and other specialized metal equipment. Rust Prevention: every step we take is to remove rust and prevent rust to from reappearing as you know rust does not stop. As soon as oxygen and moisture come in contact with bare metals corrosion will begin and the job is ruined.
Klear Kustoms Classic Car Restoration is Brampton-based company (Ontario, Canada) with a phone number 9057969919. Our data show that the company is located at the address: 16 Stafford Dr. The company has a web site: www.klearkustoms.com.
Unfortunately сompany staff has not yet provided of company's activities, mission and detailed description.